.jpg)
產品搜尋
類型 ：TFT電容觸控屏
顯示像素 ：480x800
外形尺寸(mm) ：60.86x102.57x2.3
VA尺寸(mm) ：4.3
AA尺寸(mm) ：4.3
有效尺寸mm ：56.16x93.6
應用 ：車載 ，醫療 ，工控
視角 ：全視角
背光/亮度 ：350cd/m2
引腳 ：45pin
接口方式 ：SPI
特殊說明 ：抗靜電ESD 8KV
工作溫度 ：-20~70℃
供電電壓 ：3.3V
驅動芯片 ：ST7701S<TFT>,GT911<CTP>
4.3寸TFT IPS全視角 480X800分辨率 LCD電容觸控屏-TFT液晶模組廠 TFT-H043B15WVIST3C45
4.3寸TFT電容觸控屏--工業級LCD液晶顯示屏製造商--深圳BG視訊官網
這是對具有電容式觸摸麵板和 3:2 縱橫比的 TFT 顯示模塊的描述 。 顯示屏尺寸為4.3英寸 ，分辨率為480×800像素 。 它采用市場上流行的 IPS 麵板 ，提供 80/80/80/80 度的寬視角 。
驅動IC GT911支持4通道MIPI接口 ，背光低功耗 。 顯示屏提供 350 cd/m2 的亮度和 800:1 的對比度（典型值） 。模塊工作電源電壓範圍為2.6~3.6V ，典型值為3.3V 。 設計工作溫度範圍為-20至+70℃ ，存儲溫度範圍為-30至+80℃ 。
General Feature
Item | Standard Value | Unit | ||
Display Size | 4.3 | Inch | ||
Number of Pixels | 480(H)*3(RGB)* 800(V) | dots | ||
Active Area | 56.16x93.6mm | mm | ||
Outline Dimension | 62.46x102.97x3.85 | mm | ||
Viewing Direction | FULL O'clock | - | ||
Interface | SPI+RGB | - | ||
Driver IC | ST7701S(TFT)GT911(PCAP) | - | ||
Driver Condition | VCI=3.3V(Typ) | V | ||
Backlight | - | - | ||
Touch Panel | WHITOUT TOUCH | |||
CTP Driver IC | - | - | ||
Driver Condition | VDD=3.3 | V | ||
TFT Operation AT | -20 ～ +70 | ℃ | ||
TFT Storage AT | -30 ～ +80 | ℃ | ||
Pin Description
| Pin NO. | Symbol | Description |
| 1 | RTP-XR/CTP-SCL | Touch control pin |
| 2 | RTP-YD/CTP-SDA | Touch control pin |
| 3 | RTP-XL/CTP-INT | Touch control pin |
| 4 | RTP-YU/CTP-RES | Touch control pin |
| 5~6 | GND | Ground |
| 7 | VCI | Digital Power |
| 8 | IOVCC | Power Supply for I/O System |
| 9 | SDO | Serial data output pin used for the SPI Interface. |
| 10 | SDI | Serial data input/output bidirectional pin for SPI Interface. |
| 11 | SCL | Serial clock input for SPI interface. |
| 12 | CS | A chip select signal |
| 13 | RESX | TFT Reset Pin |
| 14~21 | DR[7~0] | Red data bus |
| 22~29 | DG[7~0] | Green data bus |
| 30~37 | DB[7~0] | Blue data bus |
38 |
DEN | Data input enable. Low: access enabled ; High: access inhibited |
| 39 | PCLK | Pixel clock input pin |
| 40 | HSD | Horizontal sync signal |
| 41 | VSD | Vertical sync signal |
| 42 | NC | No Connect |
| 43 | LEDK | LED Cathode |
| 44 | NC | No Connect |
| 45 | LEDA | LED Anode |
All Products
| Reliability Testing | Customers can expect all production parts to meet or exceed operational requirements over temperature, humidity, and vibration. |
| Glass Cleanliness | Customers can expect glass to be protected by liners and presented mindful of cleanliness standards. This means glass will be clean of contaminants, fingerprints, and other foreign material. |
| ESD Protection & Safety | All devices are designed and handled in consideration of ESD protection. This includes ESD-SAFE packaging within anti-static bags, wraps, and trays. Customers are reminded to always follow ESD safety to best protect the devices. |
